Characteristics Data of NSN 3020-00-517-3937, 3020005173937
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| AGJS | PITCH DIAMETER | 1.2182 INCHES MINIMUM AND 1.2187 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 78 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.250 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.390 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.275 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWWH | END NOMINAL LENGTH | 0.040 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.225 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TWO HOLES 0.109 IN. DIA AND 0.094 IN. DEEP DRILLED INTO BODY OF GEAR OPPOSITE HUB. HOLES ARE 180 BEG APART AND ON THE SAME CENTER LINE AS BORE. THE CENTER OF DRILLED HOLES ARE 0.187 IN. FROM CENTER OF BORE |
| MATT | III MATERIAL | COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-636 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
Recently Viewed Parts
Part 23201 With Different Manufacturers
Low Price
Warrantied inventory at competitive prices
Find it fast
Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast
All inventory ready to ship from our sellers
Quality guaranteed
We sell only warrantied and traceable parts
Semiconductor's Certifications and Memberships
